Publicidad
Idiomas disponibles
Idiomas disponibles
If the difference between the set temperature and the ambient
•
temperature is > 2
the unit operates at lower power.
When the temperature set on the unit is equal to the ambient
•
temperature, the fan will run for another 30 seconds to cool down the unit
inside and then the unit will go into standby mode.
When the temperature in the ambient standby mode drops below 2
•
relation to the temperature set on the device, it will turn on automatically
and start heating.
3.3.7 Setting the weekly program
The device must be turned on with the time and day of the week
•
previously set (see more under "Setting the day/time")
•
Press the automatic operation start button (k), the "P" light will be on
and the unit will enter the weekly program setting.
•
Press the day mode button (j) and the display will show "d1" to "d7" (the
corresponding day of the week, i.e. Monday to Sunday). Select a specific
day of the week, e.g. Monday = "d1", Tuesday = "d2" etc.:
With the selected day, press the button for editing the day of the week
•
(m), and the display will show up to 6 available time programs (P1-P6) for
that day, all of which can be programmed:
•
Press the auto-start setting button (l) to select the time to start the unit.
Press the same button all the time to select the hour in the range 0-24,
e.g. for 7:00, and the display will show:
C, the unit works at full power. If this difference is <2
°
C,
°
o
C in
Publicidad
