Parkside PDM 300 C3 Manual De Instrucciones página 28

PARKSIDE PDM 300 C3
These operating instructions have a fold-out cover. On the inside of the cover is a
diagram of the multimeter with the components numbered. The meanings of the
numbers are as follows:
1 Display
2 HOLD button (memory button)
3 Range selector switch
4
COM connection (earth
5 OUT INPUT connection (
6 Measuring probes (inc. cables)
7 10 A connection
8 SELECT button (switches between direct/alternating current)
3. Technical specifications
Display
Measurement rate
Measurement cable length
Battery type
Overvoltage category
Hold function
Automatic polarity display
Low battery display
Auto power OFF function
Operating temperature, humidity
Storage temperature, humidity
26 - English
)
= square wave signal)
3 ½ digit LC display, max. display:
1999
approx. 2 to 3 measurements/second
approx. 80 cm each
9 V block battery
CAT III 300 V (digital multimeter and
measurement cables)
yes
yes
yes
yes
0 °C to +40 °C, max. 75 % RH
-10 °C to +50 °C, max. 85 % RH