Parkside PDM 300 C3 Manual De Instrucciones página 35

CAUTION! Never connect a voltage source to the measurement probes
if it is set to continuity testing, resistance measurement, diode test, function
generator or current measurement. Otherwise the multimeter could get
damaged.
CAUTION! Do not expose the multimeter to any direct heat sources
(e.g. heaters), direct sunlight or strong artificial light. The device must not
be exposed to spray or dripping water or abrasive liquids. Do not use the
multimeter near water. The multimeter must especially never be immersed
(do not place any containers containing liquids such as drinks, vases, etc.
on the multimeter). Make sure that the multimeter is not subject to
excessive shocks or vibrations. Do not introduce any foreign bodies into
the device. Otherwise the multimeter could get damaged.
5. Copyright
All the contents of this user manual are protected by copyright and provided to
the reader for information only. Copying data and information without the prior
explicit written consent of the author is strictly forbidden. This also applies to any
commercial use of the contents and information. All texts and diagrams are up-to-
date as of the date of printing.
PARKSIDE PDM 300 C3
English - 33