Parkside PDM 300 C3 Manual De Instrucciones página 36

PARKSIDE PDM 300 C3
6. Before you start
Remove the multimeter and the accessories from the packaging. Before first use,
remove the protective film from the display [1].
Check the multimeter and the accessories for damage. If the multimeter is
damaged, do not use it.
6.1 Inserting / replacing the battery
The multimeter is powered by a 9 V block battery. The procedure for inserting or
replacing the battery is as follows:
WARNING! Switch the multimeter off and remove all measurement
cables before opening it!
CAUTION! If the battery is empty, the
display [1]. The battery should be replaced as soon as possible to ensure
proper functioning.
• Use the screwdriver provided to undo the top screw on the back of the
multimeter and remove the battery compartment cover by pulling it upwards.
34 - English
symbol appears on the