Parkside PDM 300 C3 Manual De Instrucciones página 42

PARKSIDE PDM 300 C3
7.9 HOLD function
Pressing the HOLD button [2] allows a measured reading to be saved on the
display [1]. Press the HOLD button [2] again to revert back to measurement
mode. While the Hold function is enabled, the
7.10 Standing the multimeter up
You can stand the multimeter
up. To stand the multimeter
up, fold out the stand on the
back.
8. Maintenance/cleaning
8.1 Maintenance
WARNING! Maintenance is required if the multimeter has been
damaged in any way, for example, if liquid has entered the product, if the
multimeter has been exposed to rain or moisture, if the multimeter is not
working properly or if it has been dropped. If this occurs, the multimeter
should not be used before it has been inspected by authorised service
personnel. All servicing work must be carried out by qualified specialist
personnel.
40 - English
icon will show on the display.