Blatchford Silcare Breathe Active Locking Liner Guia Del Usuario página 4

2 Safety Information
This warning symbol highlights important safety information.
Inspect the device for damage/deterioration before and after each use. Report anything
that might affect functionality.
Any deterioration in residuum condition
or any change in sensation should
be reported to the practitioner. If the
residual limb has tissue damage, the use
of the device should be stopped.
Make sure that any damaged skin or open
wound is properly and suitably dressed to
prevent direct contact with the device.
Wearers with sensitive skin, diabetics and
vascular cases should be extra vigilant
and may need to apply lubricant to
sensitive areas. We recommend a routine
visual check and if required the user
should consult their medical practitioner.
For other medical conditions, please,
follow the advice and recommendation
of a physician or a medical practitioner
regarding skin care.
Enlarged perforations can trap the skin
and cause blisters. If the perforations
enlarge, stop using the device
If distal oedematous swellings
corresponding to distal perforations in
the liner occur, use of the liner should be
discontinued and the swellings reported
to the practitioner.
Do not use alcohol sprays, household
cleaners, or abrasives. These cleaning
materials could damage the device and
irritate skin.
Do not pull or stretch the fabric.
Fingernails, sharp jewelry, and the locking
pin can tear the device.
If the fabric is torn, stop using it and
contact a Blatchford sales
Sockets with sharp proximal edges can
tear the device.
Take care when handling the Device
to avoid possible contamination with
materials such as fibreglass which
will stick to the device and cause skin
irritation.
When donning a sock, clothing and the
prosthetic limb, be aware that the device
can build up a static charge.
To avoid danger of suffocation, keep the
device away from babies and children.
Keep the device away from direct heat
sources.
Only use the device in combination with
corrosion resistant components.
Do not overtighten the locking pin.
4
representative.
938399PK1/3-0123