4
MAINTENANCE
Cleaning and maintenance to be carried out by the user
cannot be carried out by children under 16 years of age.
4.1 Tires
• Joyor electric scooter uses rubber elastic tires. When the
tires are worn out or have a puncture, they need to be
replaced timely.
• Contact the official distributor to replace the original tires.
• Inspect your scooter and its tires every month, check
if the screws are tightened enough. If they are loose,
tighten them.
4.2 Battery
• Joyor electric scooter is equipped with a lithium polymer
battery. The average lifespan of the battery is 1000
cycles. Under normal use and maintenance, the battery
lifespan can generally reach more than 1000 cycles.
• Before using the scooter for the first time, please charge
the battery to the full charge.
• Avoid totally depleting your scooter's battery before
charging. Always make sure it is minimum 10 % charged.
For satisfactory vehicle performance, the battery has to
be charged minimum 50 %.
• Do not leave your electric scooter with a significantly
discharged battery for a few hours. Charge it promptly.
• When storing the electric scooter for a long period, make
sure the battery is at least 40-50 % charged. It is advisable
EN
24
to charge your scooter minimum once per 30 days.
• Always use only the original Joyor charger that corresponds
to the model of the scooter.
• Do not leave your electric scooter in the cold temperature
below 0 or under the direct sun. Keep the battery dry.
Negative environmental conditions can damage the battery.
• Polymer lithium batteries have to be treated with extreme
caution. Unappropriated charging, damage or overheating
can result in a fire. Do not leave your electric scooter to
charge without supervision. Do not leave the electric
scooter to charge overnight. Always supervise the electric
scooter while it is charging and avoid battery over-charge.
Do not use, charge or leave a damaged battery unattended
and follow the disposal protocols immediately.
4.3 Charger
The dedicated charger provided by Joyor has a charging
protection timing function.
Charging instructions
• Open the charging port cover on the electric scooter and
insert the charger output connector into the charging
port.
• Insert the charger input power plug into the power
socket (AC110V-220V).
• Charger light is red to indicate that charging is in
progress; when the charger light turns green, it indicates
that the battery is fully charged.
• When charging the battery, place it in a dry, ventilated
environment.
EN
25