BABYTREND HC09 A Serie Manual De Instrucciones página 7

ASSEMBLY
TO ASSEMBLE BOOSTER SEAT
7)
• Insert metal tabs (1) and (2)
directly into the seat base
slot until it secures into place.
Ensure the backrest sits in the
base correctly (Fig. 7a).
• Important Pin Set Up: The
backrest must be in the most
upright position before inserting
the pins (Fig. 7b).
• Press Pins In: Ensure the seat
parts latched together in the
upright position. Insert the pin
all the way into each side of the
seat base and test the recline
feature (Fig. 7c). CAUTION: DO
NOT push pin into the base only.
Must catch base and backrest
(Fig. 7d).
Press
1 1
Fig. 7c
11
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Tabs
1 2
"Press and Click"
Fig. 7a
Keep Upright
Fig. 7b
2 2
Recline Handle Recline Handle
Fig. 5d
8)
• Loop the flap on the back of the pad over the top of the Seat Back.
Connect the Seat Pad to the Seat Back with the two Elastic Loops.
These fit over the Attachment Tabs located near the top harness slots
(Fig. 8a).
• Attach the bottom of Seat Pad to the Seat Base with the two Elastic
loops located at the rear of the bottom of the Seat Pad. These fit over
the Attachment Tabs located on the Seat Base near where the Seat
Back and Seat Base Join (Fig. 8b).
• Attach each anchor hook of the Seat Pad to the side of the seat
armrest (Fig. 8c). Ensure that the slot of the anchor hook slides
through the under side division (Fig. 8d).
Fig. 8a
Fig. 8c
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Fig. 8b
12
Fig. 8d