Atlas Copco MT Focus 400 CHN Instrucciones Del Producto página 15

MT Focus 400
8. Press OK.
To increment the batch number:
1. Press either the UP or the DOWN button
2. Select Batch control in the menu.
3. Press OK.
4. Select Increment batch in the menu.
5. Press OK.
To decrement the batch number:
1. Press either the UP or the DOWN button
2. Select Batch control in the menu.
3. Press OK.
4. Select Decrement batch in the menu.
5. Press OK.
To reset the batch number:
1. Press either the UP or the DOWN button
2. Select Batch control in the menu.
3. Press OK.
4. Select Reset batch in the menu.
5. Press OK.
Auto-start
If Auto-start has been enabled from ToolsTalk, an extra menu option, Auto-
start, appears.
To activate Auto-start:
1. Select Auto-start control in the menu.
2. Press OK.
3. Select Auto-start ON.
4. Press OK.
To de-activate Auto-start:
1. Select Auto-start control in the menu.
2. Press OK.
3. Select Auto-start OFF.
4. Press OK.
To temporarily disable Auto-start:
Put a non-magnetic object in the hole (A) on the front of the controller, for ex-
ample a pencil.
The Auto-start function will resume when the object is removed.
EN
© Atlas Copco Industrial Technique AB - 9836 791600 00
Operation
15