Publicidad
Idiomas disponibles
Idiomas disponibles
The machine is delivered into a carton packaging. Take out the machine and all the components from the
packaging. Peel the protection off, where present: the protection can be removed with a damp, soft cloth. Do
not use acetone, petrol or painting solvents
IMPORTANT : do not lift the machine by pulling the operating handle, because it could loose its settings.
Always lift the machine by the base or by the transport handle, if present
Should any part result defective or imperfect, do not use the machine in order not to compromise the efficiency
and the safety of the tool. Contact an authorised Service Centre to have the detective part replaced
Do not throw the carton before the machine is completely assembled
WARNING :
By cleaning the machine, after unpacking, do not use petrol or other petrol-based solvents
because extremely inflammable.
The use of such products causes fire or explosion hazard.
In general, all solvents used for machine cleaning are toxic if inhaled or ingested.
Always operate in well ventilated areas, away from potential sources of solvents. Wear a safety
mask
The machine is delivered with the cutting arm in
transport position.
To release the arm, push it down, pull and turn the
unlocking button (A) Fig.1.
List of parts contained in the packaging:
-
Mitre saw
-
Blade replacement wrenches
-
Vertical clamp
-
Horizontal clamp
-
Set of spare brushes
-
Dust collection bag
EN
REMOVAL OF PACKAGE AND CLEANING
36
Fig.1
Publicidad
