Publicidad
Idiomas disponibles
Idiomas disponibles
3.4 Battery Matching
This function can reset the monitoring unit of the car battery, by clearing the original
breakdown information about the lack of battery power to rematch the battery.
It needs to be performed in the following cases:
Replacement of the main battery needs to utilize battery matching to clear the
•
former information about the lack of power, thus avoiding false information detected
by the relevant control module which may cause the failure of some electronic
auxiliary functions. For example, the vehicle automatically stops; the sunroof can't
work by one key; electric windows can't open and close automatically.
The battery monitoring sensor uses the battery matching function to re-match the
•
control module with the monitoring sensor, so as to detect the use of the battery
power more accurately, and avoid receiving wrong information from instrument
prompts which will cause false alarms.
3.5 ABS Bleeding
This function enables you to perform tests to check the operating conditions of the
Anti-lock Braking System (ABS).
It needs to be performed in the following cases:
When the ABS contains air.
•
When the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line,
•
or brake fluid is replaced.
3.6 Electronic Parking Brake Reset
This function helps you to replace and reset the brake pad.
It needs to be performed in the following cases:
The brake pad and brake pad wear sensor are replaced.
•
The brake pad indicator lamp is on.
•
The brake pad sensor circuit is short, which is recovered.
•
The servo motor is replaced.
•
3.7 DPF Regeneration
This function can help remove particulate matter from the trap by using combustion
oxidation methods to keep the performance of the trap stable.
It needs to be performed in the following cases:
Replace the exhaust back pressure sensor.
•
Disassembly or replacement of the particle trap.
•
Removal or replacement of fuel additive nozzles.
•
Removal or replacement of catalytic oxidizer.
•
The DPF regeneration fault lamp is lit and matched after maintenance.
•
Repair and replace the DPF regeneration control module.
•
29
Publicidad
