Publicidad
Idiomas disponibles
Idiomas disponibles
Functional Description
B
C
D
Figure
1: Cordless Polisher/Preparation
A – Fuel Gauge
B – Variable Speed Trigger Forward / Lock
Switch
C – Release Button
D – Battery Pack
E – Gear Shifter
Specifications
Motor Voltage ........................................14.4 VDC
Spindle Thread ................................ 5/16" -24UNF
Disc Pad ...........................................2.0" (51 mm)
Disc Pad ...........................................3.0" (76 mm)
Free Speed Low (1) ...........................0-3500 RPM
Free Speed High (2) ........................0-15000 RPM
Weight with Battery Pack ........... 1.8 lbs. (0.82 kg)
Length ........................................5.2" (132.0 mm)
Height ........................................7.8" (198.1 mm)
Width ............................................1.9" (48.5 mm)
Operating Temperature
............................... -4°F(-20°C) to 140°F(60°C)
Storage Temperature
............................... -4°F(-20°C) to 140°F(60°C)
Noise* (Tested in accordance with ISO 15744)
Sound Pressure Level (A) .......................72.0 dB
Uncertainty, K ...........................................4.7 dB
Sound Power Level (A) ...........................83.6 dB
Uncertainty, K ...........................................4.7 dB
Vibration* (Tested in accordance with ISO 28927)
Vibration Level .....................................1.50 m/s
Uncertainty, K ......................................0.61 m/s
ZCTPP761ACE Rev. A
E
A
*These declared values were obtained by
laboratory type testing with the stated standards
and are not adequate for use in risk assessments.
Values measured in individual work places may be
higher. Values and risk of harm experienced by an
individual user are unique and depend upon the
environment and manner in which the user works,
the work piece and the workstation design, as well
as upon the exposure time and the physical
condition of the user.
We, Snap-on Tools Company, cannot be held liable
for the consequences of using the declared values,
instead of values reflecting the actual exposure
determined in an individual risk assessment in a
work place situation over which we have no control.
Symbology
SYMBOLOGY
n xxx/min
Ø
2
2
8
REFER TO INSTRUCTION
MANUAL/BOOKLET
WEAR EYE PROTECTION
WEAR RESPIRATORY
PROTECTION
WEAR EAR PROTECTION
VIBRATION HAZARD
VOLTS
DIRECT CURRENT
RATED SPEED
DIAMETER
CE MARK
CANADIAN - UNITED STATES
UNDERWRITERS LABORATORY
(06/17)
Publicidad
