Zipro Boost Gold Manual De Uso página 11

EN
and should not be thrown away with household waste. Dispose of them
in an appropriate battery recycling centre.
ENVIRONMENT
The device is delivered in a package to protect it against any possible
transport damage. The packaging is made from non-processed
material and can be recycled. Throw the materials to appropriate
colour containers for selective waste collection.
Protect the environment and do not throw used batteries into
household wastes. Return them to the point of sale or a special
recycling centre.
Used electrical equipment (including the computer and power supply)
are recyclable. Do not throw them out with household waste as they
may contain substances dangerous to the health and environment. You
can actively contribute to sustainable use of natural resources and the
protection of the natural environment by handing the used device to
a recycling centre for used electrical devices.
ASSEMBLY
The device must be assembled carefully by an adult. In case of doubt,
ask a more experienced person for help.
ASSEMBLY DIAGRAM (→ See page 2)
ATTENTION! Do not use parts other than those provided by the manufacturer.
PARTS LIST
No. Description
1
Main frame
2
Front base
3
Rear base
4
Rear base levelling pad
5
Bolt m8xl74
6
Curved washer Φ8.5x1.5x φ25xr33.5
7
Nut M8
8 Crank
9 L/R Left/right pedal
10 Front base cap
11 Computer cable
12 Resistance adjustment cable
13
Connecting cable
14
Internal hexagonal bolt m8x16
15
Saddle height adjustment sleeve
16
Handlebar angle adjustment handle
17
Handlebar column
18
Front handlebar column cover
19
Flat washer
20
Cross-head bolt
21
Cross-head bolt m4x10
22
Handlebar column cover
23 Handlebar cap
24 Computer
ASSEMBLY MANUAL
CAUTION! Follow the steps below during the assembly and use tools supplied with the product.
Prepare sufficient space for the assembly operation.
It is advisable to assemble the product with another person because of the weight of some elements.
11
 Prior to the assembly, make sure the set contains all
the listed elements and whether none of the parts was damaged
during transport. If any parts are missing or you have any other
reservations, contact the seller.
 Have a look at the drawings and explanations and follow the
assembly manual when assembling the device.
 Be careful during the assembly. There is a risk of injury when
using the tools and parts.
 Remember to keep your surroundings safe. Do not let tools and
parts lie around in chaos. Remember that plastic foil and bags
pose o suffocation risk to small children.
 Assembly parts necessary for a specific step in
the assembly manual are shown in pictures and included in
instructions. Use the elements indicated in the assembly
manual.
 Do not tighten parts completely during the first stages
of the assembly. Tighten connections after all parts are placed
and fitted properly.

The manufacturer may have assembled some parts.
Quantity No. Description
25
1 Resistance adjustment knob
26
1 Handlebar foam
27
1 Steering wheel
28
2 Heart rate measurement cable
29
4 Saddle height knob
30
8 Separator
31
1 Flat washer D13xd8x1,5
1 32 Handlebar cover
1/1 33 Saddle
2 34 Saddle horizontal position guide
1 35 Saddle guide cap
1 36 Saddle column
37
1 U-bracket for horizontal saddle positioning
38
4 Flat washer d10
39
1 Saddle horizontal position knob
40
1 Handlebar cover
41
1 Saddle
42
1 Saddle horizontal position guide
43
1 Water bottle
44
1 Water bottle holder
45
4 Screw
46
1 Flat washer
2 47 Towel holder
1
1. Install the front and rear base
Fix the rear (3) and front base (2) to the main frame (1) using bolts (5), curved
washers (6), and nuts (7).
ATTENTION! Remove any plastic or cardboard safety inserts before assembly.
Quantity
1
2
1
1
1
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
2
2
1