Publicidad
Idiomas disponibles
Idiomas disponibles
PRE-INSTALLATION
SITE REVIEW AND PREPARATION
RAIL MEASUREMENTS
NOTE: Chair armrest
extends approximately
5 to 8" (127 to 203 mm)
beyond rail at upper
landing, depending
on arm width setting.
NOTE: Seat height
is adjustable in 1"
increments up to 3"
(76 mm). See page
38 for details.
© BRUNO INDEPENDENT LIVING AIDS, INC.®
1. Review site layout. Make sure to note all
obstructions.
2. Panel off any open sections of the stairway
prior to installation.
3. Determine if stairlift installation side (right or
left) as viewed from bottom of stairs.
1. Determine exact rail length.
NOTE: The rail length will determine the
Measure length of stairway by placing a tape
measure in a straight line on the stairs from
the top step nose to the floor.
STAIR LENGTH = A
(A) Length of Stairway:
(B) Add 13" (330mm) for a
20" (508 mm) seat height:
[Add 1.5" (38 mm) for each 1"
(25 mm) seat height is increased.]
For obstacles at top of stairs:
See Bruno's Brainshark "Ramping the
Rail",
and remember:
Nose-to-floor + nose-to-door + 2" =
Overall Rail Length Required
OR
Add Stair Length (A) to
Measurement (C) (i.e., door)
plus 2" (50mm):
C
Overall Rail Length Required
NOTE: For units with overspeed brake,
2. Mark Overall Rail Length Required on rail,
measuring from top of rail downwards.
6
seat height at the top of the stairs.
add 4" (102mm) to rail length.
SRE-2010 INSTALLATION 02-08-2019
+
+
=
Publicidad
