Zeiss DTI 6/20 Manual De Instrucciones página 10

(2)
(3)
(1)
(18)
Power on/off
Press the on/off button (4) for a longer time to switch on the device. The LED (3) is
green. The LED (3) lights up red when the charge level is low.
Press the on/off button (4) for a longer time to switch off the device again. The LED
is then off.
Note: The on/off button (4) must be pressed
until the OFF symbol appears on the display.
Only then can the on/off button (4) be released
and the device switches off. If the on/off
button (4) is released before the OFF symbol is
displayed, the device does not switch off but
switches to standby mode.
Navigation
Press and hold the menu button (6) to show the
main menu on the display. Look through the viewfinder (10). The rotary wheel (5)
and the menu button (6) are used to navigate in the main menu.
Turn the rotary wheel (5) to the right to scroll right or down. Turn the rotary wheel
(5) to the left to scroll left or up.
Briefly press the menu button (6) to select a menu item. This opens the submenu.
Make your settings using the rotary wheel (5). Briefly press the menu button (6) to
confirm your selection and return to the main menu.
Press and hold the menu button (6) to exit the main menu and return to observation
mode. Alternatively, navigate to "Exit". Briefly press the menu button (6) to return to
observation mode.
Automatic standby
A built-in proximity sensor (17) on the viewfinder (10) offers a touchless auto
standby. When the function is enabled, the standby is activated automatically after
a few seconds as soon as the viewfinder (10) is removed from the eye. When the
viewfinder (10) is placed against the eye again, the device automatically switches to
observation mode.
To deactivate automatic standby, select "Settings" from the main menu. Then
navigate to "Settings Device Menu". Briefly press the menu button (6) to open
the submenu. Navigate to "Automatic Standby" and briefly press the menu
button (6). Select a time after which the device switches to standby as soon as
the viewfinder (10) is removed from the eye. Briefly press the menu button (6) to
confirm the selection.
Standby
Briefly press the on/off button (4) to switch the device to standby mode. The LED (3)
blinks green. Briefly press the on/off button (4) again to switch the device back to
observation mode. The LED (3) is permanently green.
In standby mode, the LED (3) flashes red when the charge level is low.
(4)
(5)
(6)
(7)
(8)
(11)
(9)
(10)
(10)
Observation mode
Look through the viewfinder (10) to observe the scene. Turn the diopter wheel (8)
to focus the screen.
Turn the focus ring (2) on the lens (18) to focus on the scene.
Zoom
In observation mode, the rotary wheel (5) can be used to zoom in and zoom out the
scene. You can zoom between 1.0x and 10x. The zoom speed can
be set via the ZEISS Hunting App. The currently set digital
magnification is shown in the upper right corner of the display.
Shooting mode
You have the possibility to capture a photo or record a video. Press and hold the
Shutter button (7) to switch between the two shooting modes. The symbol at the
top left of the display changes to indicate the selected mode.
Briefly press the Shutter button (7) once to capture a photo or record a video. Briefly
press the Shutter button (7) again to stop a video recording in progress.
Photo mode
(15)
(14)
(13)
(11)
(17)
(8)
(9)
Video mode
(1)
(18)
(2)
(16)
10 | 100 EN