TRAPP TRC-40 Manual De Instrucciones página 25

www.trapp.com.br
1. Before crushing, make sure that the residues to be
crushed do not contain non-crushable objects such
as stones, glass, clay, sand, and other items.
2. Activate the motor and wait to reach the maximum
speed.
3. P
lace the green coconuts one by one in the feeding
funnel of the shredder (we recommend shredding
coconuts without water). Overloading the feed
hopper impairs machine productivity, that can
reach up to 1,000 kg/h.
4. Minor pieces of coconut can pass through the blade
assembly if they are fed separately, just as larger
pieces may not pass through the feeder hopper,
case in which you can select the coconut size while
feeding the machine to achieve the desired results.
5. Check the crushed material outlet spout while
working, if necessary turn off the crusher to clear
crushed material from the outlet spout. This
Power
Model
(cv)
5
TRC-40
5.5
Notes: The machines ship from factory without (On/Off) switch and electric motor connections; wiring to the desired
voltage as available in the region is at the customer's discretion. The motor wiring diagram is shown on the motor
itself, so that the customer can make the connection.
TRAPP does not provide warranty in case of motor burn due to inverted or wrong connection, as described in the manual.
Power
Model
(hp)
6.5 HP
TRC-50
(TRAPP/Lifan)
Operation
Technical Specifications
Frequency Voltage
(Hz) (V)
60 220/440
50 220/440
60 220/380/440
50 220/380/440
Tank Crankcase
Capacity Capacity
(liters) (liters)
1.7 0.59
situation may occur when the crushed coconut
fiber is wet, or if the coconut is in decomposition
state.
6. When releasing coconuts into the feeder hopper,
make sure that they do not get stuck in the blade
assembly, as this will prevent you from crushing
more material; in this case turn off the crusher,
remove the coconut blocked in the cutter assembly,
and resume normal work.
7. The accumulation of crushed material can obstruct the
exit of material through the outlet spout of the machine;
in this case remove the crushed mound using a shovel
or hoe, or place the machine elsewhere to avoid the
accumulation of crushed material in the outlet spout. If
desired you can crush the material and pour it
directly into a suitable container, replacing the
container as it fills.
Note: 1) This tool can be purchased separately.
Consumo
Promedio
Power Supply
(approx.)
(kW/h)
Monophase
Monophase
4
Three-phase
Three-phase
Average
Type of Consumption
Oil (approx.)
(liters/h)
20W50 1
RPM
3,600
RPM
3,400 to 3,600
25