Domo DO7296S Manual De Instrucciones página 62

DUST BIN
23. Pre-filter
24. HEPA filter
25. Filter sponge
26. Dust bin
27. Dust collector lid
WATER TANK
28. Tank sealing cap
29. Water tank
30. Mop
CHARGING STATION
31. Indicator light
32. Adapter input
33. Charging contacts
BEFORE THE FIRST USE
· Put two AAA batteries in the remote control.
· Set the time (see "use/use with remote control/ Clock settings").
· Prior to initial use, charge the robot vacuum cleaner for 5 hours (see "charging").
· Place the signed brushes on the vacuum cleaner. Press on them until you hear a click. The brushes and
the machine are marked with L (left) and R (right); make sure they match.
INSTALLING THE CHARGING STATION
1. Place the charging station on a smooth hard surface, e.g.
tiles, parquet, short-haired sturdy carpet, against a wall or
cupboard.
2. Make sure that there is an area of at least 1 m free on the
left and right sides of the charging station. In front of the
charging station, there must be a free area of 2 m. If this is
not the case, it is possible that the vacuum cleaner cannot
find the charger when it must charge.
CHARGING
Turn the appliance on using the on/off switch. The appliance can be charged with or without the charging
station.
CHARGING WITH CHARGING STATION
1. Ensure the charging station is installed correctly. See "Before first use/Charging station installation".
2. Plug the adapter into a socket and insert the adapter output into the charging station.
· IMPORTANT: always make sure that no cables are in front of or next to the charging station; these
could get caught between the wheels or brushes of the vacuum cleaner.
62
DO7296S
28
27
29
30
33
1 m
1 m
2 m
23
24
25
26
31
32