Domo DO7296S Manual De Instrucciones página 63

Idiomas disponibles

When the battery is almost empty, or when the appliance has finished its programme, the vacuum

cleaner will automatically return to the charging station if one has been installed. If no charging

station is installed, the vacuum cleaner will enter standby mode.

You can also choose to charge the appliance sooner by pressing the HOME button on the remote

control.

When charging, the control button indicator light on the appliance will flash. Once the vacuum cleaner

is fully charged, the light will switch off.

CHARGING WITHOUT CHARGING STATION

Plug the adapter into a socket and insert the adapter output

into the device.

When charging, the control button indicator light on the

appliance will flash. Once the vacuum cleaner is fully charged,

the light will switch off.

PLEASE NOTE

Ensure that the on/off switch on the side of the appliance is on at all times, otherwise the appliance

will not be able to charge.

Ensure the adapter is plugged into a socket and connected to the charging station, otherwise the

vacuum cleaner will not be able to find the charging station.

USE

Turn the machine on with the on switch on the side of the appliance prior to use or

charging.

STANDBY/SLEEP MODE/OFF

Standby

The machine is in standby mode when the on switch is on and the machine is in idle state, ready to be

used immediately.

Sleep mode

The machine automatically goes into sleep mode after being in standby mode for 10 minutes. When the

machine is in sleep mode, you must first activate it before you can start the machine. Do this by pressing

the control button on the appliance or the ON/OFF button on the remote control.

Off

You can turn off the machine completely by switching off the on switch on the side of the device while in

standby mode.

USE WITHOUT REMOTE CONTROL

Press the control button for automatic cleaning. The vacuum cleaner will plot its own path to vacuum

the entire area, taking walls, obstacles and stairs into account.

When the machine is finished vacuuming, it will automatically return to the charging station. If no

charging station is installed, the vacuum cleaner enters standby mode.

It is also possible to allow the machine itself to stop cleaning. To do this, press the control button. Turn

the device off with the on switch on the side of the machine.

www.domo-elektro.be

DO7296S