Domo DO7296S Manual De Instrucciones página 65

Idiomas disponibles

Confirmation button/pause button

This button can be used to start automatic cleaning when the appliance is in standby mode. The

vacuum cleaner will plot its own path to vacuum the entire room, and will avoid walls, obstacles, and

stairs.

When the battery is almost empty, or when the appliance has finished its programme, the vacuum

cleaner will automatically return to the charging station if one has been installed. If no charging

station is installed, the vacuum cleaner will enter standby mode.

You can also make the appliance stop cleaning. To do this, press the on/off switch. Switch the

appliance off using the on/off switch on the side of the appliance.

Use this button to confirm your settings.

This button can also be used to pause the vacuum cleaner. If you press this button again, the appliance

will continue to complete its programme.

Suction level adjustment

Use this button to set the suction level. A symbol for the selected setting will be shown on the display.

Clock settings

Press this button to set the clock.

The hours on the display will flash. Set the hours by pressing the up or down arrows.

Then press the right arrow to set the minutes. The minutes on the display begin to flash. Set the

minutes by pressing the up or down arrows.

Press the confirmation button to confirm the time.

Wall-guided cleaning

Press this button to set a route where the vacuum cleaner cleans along walls and also cleans corners.

10. Schedule settings button

Use this button to programme the robot vacuum cleaner to automatically vacuum at a set time every day.

For example, if you set the vacuum cleaner for 09:30, it will start to clean at 09:30 every day.

Press the schedule settings button.

Set the clock using the arrow buttons.

Then select the desired suction level.

Press the confirmation button to confirm the setting.

The display will show the icon at all times, so that you know this setting is in place.

To cancel this setting, press and hold the schedule settings button for several seconds until the icon

disappears from the display.

www.domo-elektro.be

DO7296S