GET 2ND INJ. KIT Guia De Instalacion página 11

11.
Connect the male
connector of the second
injector harness
the GET injector. Pass
the wiring behind the
left engine
bracket until you reach
the control unit located
under the saddle.
12.
Remove
protective cap from the
"INJ 2" connector of the
GET control unit.
Connect the "INJ 2"
connector of the control
unit to the
connector of the second
injector harness.
13.
Using cable clamps (not included in the kit), join the
wiring first to the fuel pipe B and then to the main wiring line.
14.
Re-install the tailpipe, tank, and all other components
removed during the preliminary steps.
15.
Connect the OEM
hose to the fuel pump.
to
support
the
female
11
Second
injector GET
harness ECU
OEM
To the fuel pump
EN