Children must not play with the scooter.
Your electric scooter has an electric motor in the rear wheel that starts
after the first push and when the accelerator lever is operated. The
electric motor stops as soon as one of the two brake levers is operated
or if the speed exceeds 25 km/h. It automatically resumes below 23
km/h.
The electric scooter must be maintained properly according to the
instructions in this manual.
Check regularly that the KICKWAY E1 is in good condition, read this
guide carefully and make sure you understand all the information about
the product before using it.
Take the time to learn the basic use of your scooter to avoid a serious
accident in the first few months of riding it.
Warning: as with any mechanical component, a vehicle is
subject to high wear and tear. The various materials and
components can react differently to wear or aging. If a
component exceeds its expected lifetime, it may suddenly break and risk
injury to the user. Cracks, scratches and discolouration in areas subject
to high stress indicate that the component has exceeded its service life
and should be replaced.
Recommendation: safe use
Before using your electric scooter, make sure that it is in good working
order.
Pay particular attention to the following points:
Nuts, screws, clamping levers, the tightening of components
•
The state of the brakes
•
The attachment of the handlebars to the stem
•
The tightening and fixing of the wheels to the frame and fork
•
Condition and pressure of the wheels
•
The correct position of the reflectors
•
The proper functioning of the lights
•
It is forbidden to have more than one person on the scooter
•
Do not use your scooter in poor light conditions.
•
51/269