Publicidad
Idiomas disponibles
Idiomas disponibles
1 Earbud LED indicator: the LED is white
when the earbud is on, when it is charging, and
when it pairs
2 Power/multifunction button: press the
multifunction button to power the earbuds
on and off. Also press this button to start and
pause media, and to answer or end an
incoming call
3 Microphone
4 USB output port: use this port as a
powerbank to charge your smartphone
5 Right earbud battery LED indicator:
indicates the charge of the right earbud
6 Charging case battery LED indicator:
Showcases the battery status of the charging case
7 Left earbud battery LED indicator:
indicates the charge of the left earbud
8 Type C charging port: insert the Type C
cable in this port to charge the battery
3. Basic operation
3.1 Charging the case and earbuds
1. To charge the case, plug the supplied USB
cable into a power source and the Type C
end into the case's charging port. The case
starts charging automatically.
2. Charging the case battery to its full capacity
may take 3 hours.
3. Once the LED indicator shows 100, the
charging case is fully charged.
4. Unplug the case from the power source and
place the earbuds on the sockets of the
charging case.
5. While the earbuds are being charged, the
LED indicator will show the power status of
both earbuds. When fully charged, the LED
will show four lines on each side. This
process takes 2 hours. Meanwhile, the
charging case indicates the remaining
capacity of the battery.
6. The fully charged earbuds have up to 12
hours of battery runtime at 50% volume or
about 80 hours of standby time.
7. A low battery prompt will be heard to let
you know that the battery is below the
acceptable level to continue operating
properly.
3.2 Turning your earbuds on or o
1.The earbuds automatically turn on when
removed from the charging case or press
and hold the multifunction button on each
one for about 3 seconds, you will hear the
prompt "powered on" and a beep.
Publicidad
