Network section
Ethernet LAN
100BASE-TX
Wireless LAN
Compatible standards:
IEEE 802.11 a/b/g/n/ac
Security:
WPA/WPA2-PSK
Radio frequency:
2.4 GHz, 5 GHz
BLUETOOTH section
Communication system
BLUETOOTH Specification version 5.0
Output
BLUETOOTH Specification Power Class 1
Maximum communication range
Line of sight approx. 30 m (98.4 feet)
Maximum number of devices to be registered
10 devices
Frequency band
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control
Profile)
Supported Codecs
3)
SBC
, AAC, LDAC
4)
Transmission range (A2DP)
20 Hz – 40 000 Hz (LDAC sampling
frequency 96 kHz with 990 kbps
transmission)
20 Hz – 20 000 Hz (Sampling frequency
44.1 kHz)
The actual range will vary depending on factors
1)
such as obstacles between devices, magnetic
fields around a microwave oven, static electricity,
cordless phone, reception sensitivity, antenna's
performance, operating system, software
application, etc.
BLUETOOTH standard profiles indicate the
2)
purpose of BLUETOOTH communication between
devices.
Codec: Audio signal compression and conversion
3)
format
Subband Codec
4)
Wireless Transmitter/Receiver Section
Communication system
Frequency band
Modulation method
General
Power requirements
Power consumption
1)
Dimensions (width/height/depth) (Approx.)
2)
Mass (Approx.)
Design and specifications are subject to change
without notice.
Wireless Sound Specification version 4.0
5 GHz
OFDM
120 V AC, 60 Hz
240 W
Standby mode: 0.5 W
(When [Standby Through],
[Network/Bluetooth Standby], and all zone
power are set to [Off].)
Network/Bluetooth Standby mode: 3.5 W
(When [Network/Bluetooth Standby] is set
to [On], and [Standby Through], and all
zone power are set to [Off].)
430 mm × 156 mm × 331 mm (17 in ×
6
/
in × 13
/
in) including projecting parts
1
1
4
8
and controls
9.4 kg (20 lb 12 oz)
65
EN