Publicidad
Idiomas disponibles
Idiomas disponibles
Failure to follow the below precaution could result in electrical shock, fire,
explosion or personal injury�
1� The plug must be plugged into an individual socket that is properly
installed and grounded�
2� Do not use an extension cord or plug adaptor with this unit�
Before starting the unit
1. Select a suitable location, make sure the unit is near to an electrical outlet.
2. Install the flexible exhaust hose and the adjustable window slider kit.
3. Plug the unit into a right outlet.
Cooling operation mode
1. Press the MODE button in a sequence until the cool indicator is lighted.
2. Press the " + " or " - " button to set your desired setting temperature.
3. Press FAN button to select the fan speed.
Drying operation mode
1. Press the MODE button in a sequence until the dry indicator is lighted.
2. The fan will run at a fixed speed at this operation mode.
3. Close windows and doors for the best dehumidifying effect.
Note: The setting temperature and fan speed can not be adjusted� The setting
temperature is 25 °C (77 °F) and the fan speed is low�
Fan operation mode
1. Press MODE button in a sequence until the fan indicator is lighted.
2. Press the FAN button to select the fan speed.
Note: The setting temperature can not be adjusted�
Auto-restart function:
If power to the unit is interrupted, the unit will restart itself in its last used mode /
settings once power is restored. The compressor will restart after 4 minutes.
1. Set: Press the sleep button 10 times within 5 seconds, buzzer sounds 4 times.
2. Cancel: Press the sleep button 10 times within 5 seconds, buzzer sounds
2 times.
WARNING
42
Operation
Publicidad
