FULTON XLT 7.0 Manual De Instrucciones página 11

MODEL
XLT 7.0
XLT 10.0
WARNING
In order to ensure long term performance of your XLT Winch, and to prevent premature wear,
ensure you follow the guidelines below:
1. Never exceed the rated capacity of the winch for your application.
2. Do not exceed the recommended operational time for the winch.
1-minute of operation, followed by a 14-minute cool-down period
3. Make sure that all electrical connections to the battery are correct, tight, and clean.
4. Do not operate in a repeated "stop-and-go" manner.
5. Immediately stop the winch if it begins to slow down excessively and/or if it feels like it is struggling
to reel in. This is a sign that the rated capacity has been exceeded, and rapid buildup of excessive
heat will occur.
©2021 Horizon Global Americas Inc. •
Best Practices
Table 5 - Rated 1
MODEL Pull
XLT 7.0
2,500 lbs.
XLT 10.0
3,500 lbs.
1
Not to be used as hoist.
2
When trailer is equipped with rollers, and on a maximum
incline of 20 degrees. Wooden and/or carpeted bunks will
significantly reduce this capacity.
Table 6 - GUIDE TO ROLLING LOAD CAPACITY*
Maximum allowable weight for a rolling load
0° 3°
25,000 lbs. 20,000 lbs.
11,340 Kg 9,070 kg
35,000 lbs. 30,000 lbs.
15,875 kg 13,600 kg
All capacities shown are with 2' of strap on the reel and 10% rolling friction factor.
The winch's capacity will be reduced by approximately 10% with each layer added to the reel.
st
Layer Capacity (Max.)
1
Roll
See table 6
See table 6
RAMP INCLINATION
5° 10°
15,000 lbs. 10,000 lbs.
6,800 kg 4,535 kg
25,000 lbs. 20,000 lbs.
11,340 kg 9,070 kg
F4088-00 REV D (7871) 08/2021
2
Marine
7,000 lbs.
10,000 lbs.
15° 20°
8,500 lbs. 7,000 lbs.
3,855 Kg 3,175 Kg
15,000 lbs. 10,000 lbs.
6,800 Kg 4,535 Kg
15°
10°
5°
3°
E11