Publicidad
Idiomas disponibles
Idiomas disponibles
•
Read, understand, and follow the warnings and instructions in this
manual.
•
Check all the fasteners and verify that there are at the proper
torque.
•
Replace as necessary.
•
Check that the wiring is correct, and the connections are tight.
•
Check that there are no damaged (chafed, cut, etc.), bare or
exposed wires, or terminals.
•
Repair or replace any components as necessary.
•
Check the condition of the strap and hook.
•
If the strap or hook are damaged or work, discontinue use and
replace immediately.
•
Keep winch, strap, and switch controls free from contaminants.
•
Use a clean rag or towel to remove any dirt and debris.
3.2 Pairing Replacement Remote
The remote transmitter and receiver are paired and cannot be interchanged. If a wireless remote
(transmitter) is lost, a new one can pair itself to an existing receiver. The pairing method is descrided
in Page E10
If the red LED is blinking, the remote needs to be paired again.
3.3 Lubrication
All moving parts in the winch are permanently lubricated at the time of assembly. Under normal
conditions factory lubrication will suffice. If re-lubrication of gear box is necessary after repair or
disassembly, use Shell EP2 or equivalent grease. Never lubricate the brake system.
3.4 How To Order Replacement Parts
For Horizon Global Tech Service Department, dial 1-800-632-3290.
WARNING
To prevent SERIOUS INJURY, DEATH and PROPERTY DAMAGE, you should read, understand
and follow the warnings and instructions in this manual.
For assistance with this product or to order replacement parts, please contact:
©2021 Horizon Global Americas Inc. •
E14
Maintenance
Table 5 - Checklist
Horizon Global Americas Inc.,
47912 Halyard Dr. Suite 100
Plymouth, MI 48170
1-800-632-3290
http://www.fultonperformance.com/
Before first
After EVERY
use
X
X
X
X
X
F4088-00 REV D (7871) 08/2021
Every 90
use
days
X
X
X
X
X
X
Publicidad
