the adapter into AC outlet. When disconnecting the AC Adapter:
Remove the AC Adapter from the electrical outlet;
Remove the AC Adapter plug from the monitor socket.
Do not plug or unplug the power cord into the electrical outlet with wet hands.
Do not overload power outlets. Plug the device into the appropriate voltage outlet.
If the AC adapter is abnormal, please change the adapter.
Do not pull out the adapter when you are using the monitor.
Do not use any other type of AC adapter as it may harm the monitor.
The monitor, the batteries and the cuff, must be disposed of according to local
regulations at the end of their usage.
2. CONNECTING THE CUFF TO THE MONITOR
Insert the cuff tubing connector into the socket in the
left side of the monitor. Make certain that the connector is
completely inserted to avoid air leakage during blood pressure
measurements.
Avoid compression or restriction of the connection tubing during measurement,
which may cause inflation error, or harmful injury due to continuous cuff pressure.
-14-