Brinkmann 810-6630-S Manual Del Propietário página 22

Choose a good, cleared assembly
area and get a friend to help
you put your grill together. Lay
card board down to protect grill
finish and assembly area.
Some parts may
CAUTION:
contain sharp edges.
Wear protective gloves
if necessary.
Step 1
Attach casters to the bottom of cart
base using eight M6 X 12 mm bolts
(black) and eight star washers as
illustrated.
Caster Tightening Pin
Note: Insert the caster
tightening pin in each
caster so caster can be
tightened.
Step 2
Lock the casters. Align key holes
in bottom of side cart panels with
corresponding pre-installed bolts.
Insert key holes over bolts and
slide toward back of base. Secure
using two M6 X 12 mm bolts
(black) as illustrated. Tighten down
all bolts.
Step 3
Use eight pre-installed M6 X 12
mm bolts (black) to attach the cart
corner brackets to the cart base
and the cart side panels. Tighten
bolts to secure.
21
Non Locking
Swivel Caster
Locking
Swivel Caster
Right Side
Cart Panel
Non Swivel
Locking Caster
Front
Back
Left Side
Cart Panel
Cart Corner
Bracket
Non Swivel
Caster