Publicidad
Idiomas disponibles
Idiomas disponibles
Notes:
• The size of used reflective tape must be around 12mm.
• The non reflective area, where the tape is applied, must
be always larger than the reflective tape area.
• If the area where the tape will be applied is reflective,
it must be covered with black painting or tape before
applying the reflective tape.
• The surface where the tape will be applied must be
clean and dry previously.
• If the RPM measurement values are very low (< 50
RPM), it is recommended to apply more than one
reflective tape in the object. Providing more accuracy
readings, with better resolution and with faster sampling
rates. However, the user must divide the display reading
by the number of applied tapes to get real value in RPM.
17
Publicidad
