Energetics E-201 Manual De Instrucciones página 10

User Manual
Service
Troubleshooting
Computer display is not working
• The computer might not be getting power. Check if the batteries are
inserted properly .
• The batteries might need to be replaced.
• Contact your local ENERGETICS-dealer if you have checked all connections
and the display is still not working .
The computer does not show values during the workout
• Check if the data cable is connected properly.
Heart rate (PULSE) shows no or incorrect read out
• Check if your palms have proper contact with the sensors. Both palms have
to be in contact with the sensors simultaneously . The display may be on a
slight delay .
• Check all cable connections.
• Try moistening your hands if they are dry.
The computer has shut down
In rare cases the computer might shut down, mainly because of sudden
changes in the electrical current or static discharge . Normally the E-201
restarts on its own .
If this should not occur a restart can be performed by removing the batteries
for a moment and reinserting them .
Care
Take care that to avoid any moisture penetration . Clean the computer with a
lightly dampened cloth . Do not use abrasive cleaning solutions .
Maintenance
There is no need for special maintenance . Regularly check that all bolts and
connections have a tight fit . Exchange any defective parts immediately . For
assistance contact your local ENERGETICS-dealer .