10.5 Phonebook status
The phonebook status shows the numbers of phonebook entries already stored.
•
Press the left 'Menu' key.
•
Press the up or down key
•
Press 'Select' to confirm.
•
Press the up or down key
•
Press 'Select' to confirm.
11 One-touch memories M1-M4
11.1 Storing a number under the one-touch memory
You can store up to 4 numbers in the direct memory keys M1 - M4. All the numbers will be
stores in the phonebook as well.
•
Press one of the 4 memory keys (M1 - M4).
•
The display will show 'Number?'. Enter the desired number (up to 20 digits).
•
Press the 'Next' soft key.
•
Select the desired ring melody associated with this number with the up or down key
/
15
7
.
•
Press 'Save'
13
saving.
11.2 Viewing the one-touch memory numbers
The one-touch memory numbers are stored inside the phonebook as the 1st 4 entries.
•
Press the phonebook key
•
Press the up or down key
11.3 Editing the one-touch memory numbers
Perform the same steps as described in "10.3 Changing a name or number in the
.
phonebook"
The one-touch memory names are stores in the phonebook as M1:, M2:,
M3:, and M4:. When you edit the name you can only add something like
'M1: Home' but you can't delete the default name.
11.4 Deleting a one-touch memory number
Perform the same steps as described in "10.4 Deleting one or all entries from the phonebook"
12 Base operation
12.1 Flash time setting
You can set the flash time to short (100ms) or long (300ms). The time is set to 100ms by
default! However, if your system requires a longer flash time, you can change it:
•
Press the left 'Menu' key.
•
Press the up or down key
•
Press 'Select' to confirm.
•
Press the up or down key
Sologic B931
/
15
/
15
to confirm your selection or press 'Back'
7
.
/
15
/
15
/
15
7
repeatedly until 'Phonebook' is selected.
7
repeatedly until 'PB Status' is selected.
to browse for other numbers.
7
7
repeatedly until 'BS Settings' is selected.
7
repeatedly until 'Flash Time' is selected.
Sologic B931
5
to leave the menu without
21