Descargar Imprimir esta página

Topcom SOLOGIC B931 Manual De Usuario página 22

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 110
Sologic B931
Press 'Select' to confirm.
Select
– 'Flash-1': (short) to have a flash of 100ms
– 'Flash-2': (long) to have a flash of 300ms
Press 'Save'
13
saving.
12.2 Changing the PIN code (system PIN code)
Certain functions are only available if you know the PIN code of the base.
The PIN code has 4 digits. The default PIN code setting is '0000'. If you would like to change
the PIN code and set your own secret code, do the following:
Press the left 'Menu' key.
Press the up or down key
Press 'Select' to confirm.
Press the up or down key
Press 'Select' to confirm.
Enter the current pin and press 'Next'.
Enter the new pin and press 'Next'.
Enter the new pin again and press 'Save'
leave the menu without saving.
12.3 Setting the dialing mode
There are two types of dialing modes that can be used on a telephone line:
DTMF/Tone dialing (the most common)
Pulse dialing (for older installations)
To change the dialing mode:
Press the left 'Menu' key.
Press the up or down key
Press 'Select' to confirm.
Press the up or down key
Press 'Select' to confirm.
Use the up or down key
Press 'Save'
13
12.4 Base reset
You can restore all Base settings back to default.
To restore the default settings:
Press the left 'Menu' key.
Press the up or down key
Press 'Select' to confirm.
Press the up or down key
Press 'Select' to confirm.
Enter the pin code (0000).
Press 'Reset'
13
saving.
22
to confirm your selection or press 'Back'
/
15
/
15
/
15
/
15
/
7
15
to confirm or press 'Back'
/
15
/
15
to confirm your selection or press 'Back'
repeatedly until 'BS Settings' is selected.
7
repeatedly until 'Modify PIN' is selected.
7
to store the new pin or press 'Back'
13
repeatedly until 'BS Settings' is selected.
7
repeatedly until 'Dial mode' is selected.
7
to select 'Tone' or 'Pulse'.
5
to leave the menu without saving.
repeatedly until 'BS Settings' is selected.
7
7
repeatedly until 'BS Reset' is selected.
to leave the menu without
5
5
to leave the menu without
Sologic B931
to
5

Publicidad

loading