Charging Indications
Table 6: Charging Indications for IMPRES 2 or IMPRES Battery -
Status
Charger Powers On
Battery Detected
Rapid Charging
Charged to 90 % or more
Charged to 95 % or more
Fault
Standby
• Battery is waiting to
rapid charge.
• Battery is too hot, too
cold, or low voltage.
• Charger is too hot.
Note:
• The Hot Charger message is introduced in V1.05 software.
• State of Charger percentage indications, with respect to Potential
Capacity versus Rated Capacity, is introduced in V1.11.01 software.
Calibration not Required
Pocket Display
IMPRES 2
CHARGER
IMPRES 2
BATTERY
OR
IMPRES
BATTERY
RAPID CHARGE
XXXX0mAh yyy%Ptl
TRICKLE CHARGE
xxxx0mAh yyy%Ptl
CHARGE COMPLETE
xxxx0mAh yyy%Ptl
WARNING:
NOT CHARGEABLE
REMOVE & REINSERT
WARNING:
HOT BATTERY
WAITING TO CHRGE
OR
COLD BATTERY
WAITING TO CHRGE
OR
VERY LOW BATTERY
WAITING TO CHRGE
OR
HOT CHARGER
WAITING TO CHRGE
17
LED Indicator
Green for approximately
1 second
Steady Red
Steady Red
Flashing Green
Steady Green
Flashing Red
Flashing Amber