Motorola IMPRES 2 Guia Del Usuario página 29

IMPRES 2 or IMPRES Battery Long-Term Storage
You can prepare stand-alone authentic Motorola Solutions IMPRES 2
or IMPRES batteries (Lithium-Ion or Nickel) for Long-Term Storage, in
a suitable storage location, by using an IMPRES 2 Multi- Unit Charger.
Other battery types are faulted. If the IMPRES 2 battery is equipped
with a Sleep mode, the charger puts the battery to sleep upon
completion of Long-Term Storage charge.
Prepare only the IMPRES 2 or IMPRES batteries for Long-Term
Storage. Remove the battery from the radio before placing it into the
charger.
DO NOT store a stand-alone battery in the charger. When preparation
for Long-Term Storage is complete, immediately remove the stand-
alone battery from the charger.
Selection of Long-Term Storage supersedes Calibration/
Reconditioning. Lithium batteries prepared for Long-Term Storage may
not meet regulations for shipment by air cargo.
Table 13: Long-Term Storage Indications of an IMPRES 2 or IMPRES
Status
Charger Powers On
Battery Detected
Battery Discharging
Rapid Charging
Long-Term Storage
Complete
Battery - Battery is due for Calibration
Charger Display
IMPRES 2
CHARGER
IMPRES 2
BATTERY
or
IMPRES
BATTERY
STORAGE DISCHRGE
xxxx% Rated Cap
STORAGE CHARGE
xxx% Rated Cap
LONGTERM STORAGE
xxx% Rated Cap
LED Indicator
Green for approximately
1 second
Battery requires Calibration:
Alternating Amber /
Green for 4 seconds
Steady Amber
Steady Red
Alternating Amber /
Green
26