Publicidad
Idiomas disponibles
Idiomas disponibles
EN
TROUBLESHOOTING
The following table shows failures types and possible causes and tells you how you
to fix them if your garden tool isn't working correctly.
If, despite this, you can not find the problem and solve it, contact our Voltr/Alice's Garden Service Centre.
Problem
The plug is not connected
The switch is defective
The engine
Defective extension cable
isn't starting
The plug is not properly connected
You did not press the lock button
Blocked rollers
Abnormal
noises
Loose screws, nuts or bolts
The blades are damaged
Excessive
vibrations
Fibres or an external element
makes it difficult to turn the wheels
Soil is too hard
Unsatisfactory
Worn roller
results
Poor work depth
The extension cord is not suitable
for the device
Device isn't
The voltage of the power supply
functioning at
is too low
full power
Ventilation openings are blocked
54
Possible cause
Solution
Plug it in
Replace the switch
Test with a new extension cable
Check connections between plug, extension
cable and machine
Press the lock button before pressing the
forward/backward handle
Switch off and wait for all elements to stop
Remove elements which are blocked
Check all screws and fasteners,
then tighten them
Straighten/sharpen the blades before using,
if vibrations continue, replace the reamer
Check each wheel turns freely
and clear the elements that may interfere
Change the work depth
Replace roller
Adjust depth
Use a suitable extension cord
Try another power source
Clean ventilation openings.
29/03/2023
Publicidad
