Publicidad
Idiomas disponibles
Idiomas disponibles
1. Remove the screw (1) that fixes the upper hinge cover (2) and remove the upper hinge cover.
2. Remove the screws that hold the upper hinge and remove the upper hinge.
3. Remove the upper hinge hole cover (4).
4. Lift the door and place it on a padded surface to prevent it from being scratched.
5. Remove the screws (7) that hold the lower hinge (8) and then remove the lower hinge.
6. Remove the foot (6). Then transfer and fix it to the opposite side.
7. Remove the bolt-pin cap (9). Remove the bolt-pin from the lower hinge and reverse the lower
hinge. Install the lower hinge to the opposite side with the screws.
8. Install the bolt-pin to the lower hinge. Install the bolt-pin cap to the bolt-pin.
9. Fit the door onto the lower hinge.
10. While holding the door in the closed position, secure the upper hinge in the top frame with
screws.
11. Secure the upper hinge cover on to the upper hinge with the screw. Attach the upper hinge hole
cover to the top of the appliance.
FUNCTIONING
TEMPERATURE CONTROL
The fridge is controlled with a temperature control knob located inside it.
Adjust the control knob as desired to suit your individual preference:
•
0 is off setting
•
1 is cold setting
•
7 is coldest setting
•
In the off position (0) the appliance does not operate (the cooling system is switched off), but
power supply is not interrupted.
•
The running time and temperature are affected by where the fridge is located, how often the door
is opened and the temperature of the room the fridge is located in.
•
When you use the appliance for the first time or after defrosting, adjust the control knob to the
coldest setting for at least 2 hours before introducing food to be stored, and then readjust to the
middle setting.
DEFROSTING
Refrigerator has to be defrosted manually
To save energy, we recommend routine removal of excess frost (3-4 mm) from the inside of the
equipment and the cooling grids. Never use sharp or pointed objects or metal tools, humidifiers or
heaters, hairdryers or anti-freeze sprays to do this job. They could irreparably damage the cooling
circuit and be a source of danger in equipment with R600a.We recomend defrosting when the
compartment is empty or only containing a few items of food.
To defrost, proceed as follows:
•
Remove all frozen food from the fridge and keep it in a cool place.
•
Set the temperature regulator to the OFF position and disconnect the plug from the outlet.
•
Wipe off condensation with a cloth or sponge.
•
Dry the fridge.
•
Switch the fridge on againt and set the thermostat as desired and out frozen food back in the
fridge.
34
Publicidad
