Crosby IP IPSTARTEC11 Manual Del Usuario página 4

USER MANUAL
For clamp types:
EN
04
© The Crosby Group LLC. Nothing from this original user instructions publication may, in any way
whatever, be replicated or published without prior written permission from The Crosby Group LLC.
1. General
You have chosen a CrosbyIP lifting clamp.
CrosbyIP clamps are the most reliable clamps available. But using reliable tools does not automati-
cally mean that practices are reliable. The people who work with clamps play an equally important
role in reliable operation. Ensure that everyone who works with CrosbyIP clamps has been instruc-
ted in the proper application of the clamps.
CrosbyIP provides a 10 year warranty for its clamps. To keep CrosbyIP clamps in optimum condi-
tion and keep warranty, regular maintenance is important. Preventive maintenance and repair shall
be carried by a repairer authorized by CrosbyIP. In order to benefit from this warranty programme
and for more details on maintenance procedures, please consult www.thecrosbygroup.com/re-
Check when
sources/crosbyip-10-year-guarantee for more information.
placing the
clamp that slings
Please read and understand these instructions before using the clamp.
are not twisted.
It is not 2. Safety precautions
permitted to stay
in the danger
„ Proper instruction for the personnel is of vital importance. This will contribute to maximum
zone of the load.
reliability in the working environment.
„ IPSTARTEC11 clamps may be applied per piece, per set or with several clamps simultaneously
No changes may
for the lifting of steel beams and profiles.
be made to
„ Ensure that each clamp receives its proportionate share of the load. When using two clamps
CrosbyIP
or more, a spreader beam is recommended.
clamps. Never
„ Hardness: With the standard clamps it is possible to lift steel with a surface hardness of 363
straighten,
HV10. For harder steel types contact your CrosbyIP Customer Service Centre.
attempt to bend
„ Temperature: the operating temperature is between -40 ºC (-40 ºF) and 100 ºC (212 ºF). For
or heat treat
other temperatures contact your CrosbyIP Customer Service Centre.
parts.
„ There are restrictions for operation in special atmospheres (e.g. high humidity, explosive, saline,
acid, alkaline).
Clamps suited
„ Loads: For proper application of the clamp consult the load diagrams 1.
for stainless
„ Ensure that all attachments between lifting eye and crane are properly fitted, secured and
steel, must be
coupled.
used only for
„ During the descent of the load there may be no obstacles present under the load that can
handling
impede the load causing a clamp to be unloaded. The clamps may only release the load when
stainless steel,
it is in a stable position.
to avoid contact
„ IPSTARTEC11 clamps are also suitable for profiles that are out of the HEA- and IPE clamp
corrosion.
range. In these cases it may be more difficult to tilt the beam into the right position. During the
Copyright © 2021 The Crosby Group LLC. All Rights Reserved.
IPSTARTEC11
Horizontal lifting and tilting of beams