Proline CB230 Manual De Instrucciones página 128

The display flashes 3 times when plugging in the microwave oven. Then it
flashes "1:00", indicating that the appliance is in the default standby status.
General
• Press
pressing ,
• After the cooking time has elapsed, the oven will beep a few times.
Setting the Clock
1. In standby state, press and hold
setting status.
• The hour digits will flash on the display.
2. While the hour digits are flashing, turn
input hour should be a 24-hour time value.
3. Press
4. While the minute digits are flashing, turn
5. Press
Microwave Cooking
This function is used for cooking and heating food. Repeatedly press
display will cycle to show 100P — 80P — 60P — 40P — 20P.
High power
Medium
High power
Medium power
Medium
Low power
Low power
CB230 IB.indd 125 CB230 IB.indd 125
OPERATION
once to temporarily stop cooking. You can resume cooking by
, or press twice to cancel the cooking program.
to confirm. The minute digits will flash.
to confirm the setting. ":" will flash on the display.
for about 3 seconds to enter the clock
to adjust the hour digits, the
to adjust the minute digits.
100% microwave power.
Applicable for quick and thorough cooking.
80% microwave power.
Applicable for medium express cooking.
60% microwave power.
Applicable for steaming food.
40% microwave power.
Applicable for defrosting food.
20% microwave power.
Applicable for keeping warm.
and the
125
26/7/2022 3:35 PM 26/7/2022 3:35 PM