Johnson JSMV2 Serie Manual De Instrucciones página 47

Manual Operations
The display panel on the indoor unit can be used to operate the unit in cases
when the remote control has been misplaced or is out of batteries.
1
2
3
Operation buttons
MODE button: Press this button to select the appropriate operating mode. Each
1.
time the button is pressed, the operation mode is shifted in the direction of the
arrow:
AUTO COOL
Auto: Automatically chooses the operation mode by sensing the difference
between the actual ambient room temperature and the set temperature on the
remote controller. The fan speed is automatically controlled.
Cool: Enables you to enjoy the cooling effect at you preferred setting
temperature (Temperature range: 16 °C/17°C~30°C(60
C(68°F~82°F) ).
Dry: Enables you to set the desired temperature at medium fan speed which
provides you with the dehumidified surroundings (Temperature range: 16
C~30°C(60 °F/62°F~86°F)
Fan speed and Sleep mode.
Heat: Permits heating operation (For cooling & heating models only, tempe-
rature setting range: 16 °C/17°C~30°C(60
Fan only: Permits fan operation without cooling or heating. In this case, however,
the setting temperature is not displayed and you cannot adjust the set tempe-
rature.
Room Temp/
Set Temp/Set
Timer display
Fan speed
operation
display
4
6
5
HEAT (for cooling and heating models only)
DRY
or 20°C~28°C(68°F~82°F) ). In Dry mode, you cannot select
Auto operation
Cooling operation
Dry operation
Heating operation
Fan operation
Vertical airflow
Horizontal airflow
Avoid direct air flow blowing
When wireless control feature
is activated (some models)
Electric heating function(some
models)
Lock operation
°F/62°F~86°F)
or 20°C~28°C(68°F~82°F) ).
°F/62°F~86°F)
V.3
FAN ONLY
or 20°C~28°
°C/17°
9