Publicidad
Idiomas disponibles
Idiomas disponibles
LOCK FEATURE: The lock feature is activated by pressing down and holding
the fan speed and swing buttons simultaneously for a period of one second.
This feature is available both when the unit is turned on or off. The first time
these buttons are pressed, the unit locks and all other buttons on the unit are
disabled (apart from the unlock button). Please note that the remote control
can still be used when the unit is locked. Press the button of the panel and
the lock icon will blink for 5 seconds at 1HZ. When these buttons are pressed
again the unit is unlocked.
Commissioning function: Press
run, the key is valid in any mode when it is turned on. On the first time, press
this button to enter the test run state.After 30 minutes, press this button
again, turn off, and exit the test run condition.
The mode key, the fan speed key and the auxiliary function key are not valid,
and all other keys are valid (including the key). Press up and down to select
the display room T1, T2, T3 (if applicable), outdoor (outdoor temperature), and
protection code, and show "nA" when there is no failure or protection.
Wireless control FEATURE (some models):
1. The wireless control indicator appears when the router has already
connected.
2. The wireless control indicator disappears when the router is not connected.
3. The wireless control indicator disappears when the wireless module can't be
connect during ten minutes.
NOTE:
The Wireless control indicator displays for 15 seconds for the first
connection.
AP network configuration:
Press the digital display button on the remote controller seven times or more,
the Wireless module will enter into AP mode. A long beep will be heard and
the Wireless control indicator will flash quickly which means the user can do
the next configuration.
Between wireless control network function and wire controller function, you
can only choose one.
Electric heating function (some models):
When the air conditioner switches to heating mode, the electrical heating
feature is activated automatically. It can be stopped or started again by panel
button
remote controller.
NOTE:
This function can only be activated by remote controller.
and
for one second to open the test
V.3
11
Publicidad
