Warranty Conditions - Lavorwash THERMIC 10 D Manual De Usuario

maintenance to the washer machine, run the
pressure down, take the water connection out.
I. LUBRICATION
Motor: see "owner's manual - general gasoline en-
gine".
High-pressure water pump: we recommend
GEAR SYNTHETIC OIL ISO 150 - Oil capacity 60 gr.
II. WATER SUCTION FILTER CHECKING
Check periodically in order to avoid deposits
clogging it (fig. 17).
III. LONG STORAGE PERIOD
If you forsee/expect to keep the machine in
environments where there is danger of ice/frost
or if you don't use it for more than 3 months, we
suggest to get the machine to intake an antifreeze
before putting it away (similar to that used for cars).
Furthermore, at start-up, small leaks may occur
from the pump; these will disappear after a few
hours in operation. Up to 10 drops a minute are
acceptable; in case of larger leaks contact an
Authorised Service Centre.
TROUBLESHOOTING
Motor: see "owner's manual - general gasoline en-
gine".
High-pressure water pump:
REPAIRS - SPARE PARTS
For any further inconveniences, not mentioned in
this booklet or any demages of the machine, we
suggest you to go to an Authorized Assistance
center for the repair or possible replacement of any
original spare parts.

WARRANTY CONDITIONS

All our machines are subjected to strict tests and
16
fig. 17
are covered against manufacturing defects in accor-
dance with applicable regulations. The warranty is
effective from the date of purchase.
The following are not included in the warranty:
- Parts subject to normal wear. - Rubber parts, char-
coal, filters and the accessories and optional acces-
sories. - Accidental damage, caused by transport, ne-
glect or inadequate treatment, incorrect or improper
use and installation failing - The warranty shall not
cover any cleaning operations to which the operati-
ve components may be subjected, such as clogged
nozzles and filter blocked due to limestones.
DISPOSAL (WEEE)
As the owner of electrical or electronic
equipment, the law (in accordance with the EU Di-
rective 2002/96/EC of 27 January 2003) prohibits
you from disposing of this product or its electrical /
electronic accessories as municipal solid waste and
obliges you to make use of the appropriate waste
collection facilities.
The product can be disposed of by returning it to
the distributor when a new product is purchased.
The new product must be equivalent to that being
disposed of.
WATER DIAGRAM
1) Water supply
2) Thermal valve
3) High-pressure water pump
4) Internal by-pass valve
5) Cleaning agent container
6) High pressure hose
7) Gun
8) Gun trigger
9) Lance
10) Nozzle head
11) Nozze