Num'axes PIE1058 Manual De Instrucciones página 20

3.3. Power adaptor
This camera can also be powered by an external DC adapter (12V/2A).
You can purchase a 12V external DC adapter at any time on www.numaxes.com.
We recommend removing the batteries when a power adapter is used.
DC power is recommended if the camera is used for security purposes.
4. Memory card
Using a memory card is required to operate the camera (SD card | Capacity from 4GB up to 32GB max | Class
10 minimum).
You can purchase micro SD cards with adapter at any time at www.numaxes.com.
When the camera is in SETUP mode and no memory card is inserted, the LDC screen displays "No SD card".
Formatting the memory card in the trail camera before using it for the first time is strongly recommended,
especially when the card has been used in other devices. A memory card formatted in another device may
not be compatible.
Before inserting or removing the memory card, the camera must be turned off (switch in the OFF position).
Failing to do so may cause loss of or damage the files already recorded on the memory card.
When the memory card is full, the LCD screen indicates "Memory full".
5. SIM card
The SIM card is already fitted in the product when you purchase it.
When the camera is in SETUP mode and no SIM card is inserted, the LDC screen displays "No SIM".
Before inserting or removing the SIM card, the camera must be turned off (switch in the OFF position).
6. Attaching the antenna
Screw the antenna onto the socket on top of the camera. Make sure it is securely attached, but do not over-
tighten it.
Guide d'utilisation PIE1058 – indice A – Janvier 2023 - 20/72