Descargar Imprimir esta página

Num'axes PIE1058 Manual De Instrucciones página 26

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

Camera ID
GPS
Sendings/Day
Cam
PIR
PIR sensitivity
PIR interval
Time Lapse
Timer 1
Timer 2
Exit
MENU
PIR
Settings
PIR sensitivity
PIR interval
− High: all 60 infrared LED will work
− Low: part of the infrared LED will be turned off.
ON | OFF
Select "ON" then press OK to set an ID number for the camera (12 digits/letters).
Such function can help you identify from where and from which camera the
photos are.
OFF | ON
With GPS ON, the GPS information will be shown on photo stamp (if the "Time
Stamp" parameter is also set to "ON").
NOTE: if the GPS signal is weak around the product, the GPS information will not
be shown on the photo stamp until the signal gets stronger.
Unlimited | 01 – 99
Example: if you select 50, every day, the camera will only send the 50 first photos
taken to the cloud storage. The rest of the photos taken that day will not be sent
but will be stored in the memory card.
Other
High
ON
OFF
OFF
OFF
Set
OK
Programmable options (default settings in bold characters)
High | Medium | Low
High sensitivity:
1) is more sensitive to movements by smaller subjects;
2) offers longer detection distance;
3) makes it easier for the PIR sensor to detect a difference between body heat
and outdoor temperature;
4) makes it easier to trigger the camera.
In high temperature environment, subjects body heat and environment
temperature are hard to tell by the camera, the suggested setting is high.
It is recommended to use low PIR sensitivity in environments with lots of
interference like hot wind, smoke, near window, etc.
OFF | ON – Default PIR interval: 20 seconds
Select "ON" then press OK to set the time interval that you desire between
photos/videos upon motion. This option avoids camera taking to many photos
or videos.
Configurable PIR Interval: from 00:00:05 to 23:59:59
Example: if the PIR interval is 00:01:00, the camera will wait 1 minute between
photo/video recordings with motion.
Guide d'utilisation PIE1058 – indice A – Janvier 2023 - 26/72
Cam
PIR
Remote control
Exit
MENU
Other
Delay 1H
Set
OK

Publicidad

loading