Num'axes PIE1058 Manual De Instrucciones página 23

Scan the QR code
Give your camera
which appeared on
a name and click
the camera screen
the "Next" button.
with the app.
To finalize the synchronisation,
switch the camera off then on
again by setting the selector
to the OFF position and then
back to the SETUP position.
Your camera can now send the
captured photos to the cloud
storage.
You can install your device
in the field.
Remember to put the selector in
the ON position before you leave.
If you need the QR code again, you can find it as follows:
Put the camera in SETUP mode > Press MENU > Go to the Other tab > Scroll down to the QR code parameter
> Press OK and the QR code is displayed on the LCD screen.
Guide d'utilisation PIE1058 – indice A – Janvier 2023 - 23/72