Luna AIWC 1 THL Manual Del Usuario página 11

1
Pos.
1. Anvil
2. Support handle
3. Air outlet opening
4. Speed regulator
5. Air inlet opening
6. Trigger
7. Torque regulator
English
Art.nr.
Luna
Square drive
Bolt capacity
Free speed
Torque (4 steps)
Torque (4 steps)
Max. reverse torque
Max. reverse torque
Hammer mechanism
Sound level (EN ISO 15744)
Vibration (EN ISO 28927-2)
Rec. hose size
Air inlet
Air consumption at 100% int.*
Air consumption at 15% int*
Air consumption at 100% int.*
Air consumption at 15% int*
Weight
* At 6.2 bar
2
6
4
3
7
26208-0104
AIWC 1" THL
inch 1
mm M22-M33
r.p.m. 5500
Nm 1150/1620/2000/2700
ft-lb 845/1190/1470/1985
Nm 2700
ft-lb 1985
typ Twin Hammer
dB(A) 104,5
m/s <12.57
2
inch 3/4
inch 1/2
l/min 1879
l/min 282
cfm 31.3
cfm 4.7
kg 8.1
22
Straight, heavy duty impact wrench with extended square drive (Pos. 1). The machine has a
patented sound attenuation system that makes the sound lower than on corresponding machines
available on the market (Pos. 3) Equipped with controls for the direction of rotation (Pos. 4)
and tightening torque (Pos. 7) and with support handle (Pos. 2). Meets EU safety, health and
environmental requirements. Ergonomically designed handle increases comfort during use.
Suitable machine for maintenance work. Supplied as standard with a set of locking pins and
locking rings for the sockets.
• User of the tool should always take care of his and other persons' safety. The user must
always use personal protective equipment.
• Wear safety goggles, in order to reduce risk of eye injuries that could be caused by flying
sawdust, dust and sparkles.
• Inhalation of dust can be harmful to health. Wear a suitable visor or breathing apparatus,
when working in a dusty environment.
5
• In case of continuous work wear safety gloves protecting against the cold air.
• In order to avoid eventual aural injuries, always use ear protection when using the tool.
• The user must always pay attention to the fact that continuous use of rotating and impact
producing manual tools could result in baneful influence on health caused by the vibration.
• Ergonomic load: Work with the tools related to recurrent, monotone movements and uncom-
fortable body positions may cause back, scruff, arm, knee and other joint injuries.
Description
Health hazards
23