Herschel SUMMIT 2600 Instrucciones De Instalación Y Funcionamiento página 5

The Herschel SUMMIT must be located in a position to allow proper and efficient use but one that ensures
hot parts are not touched accidentally.
Consideration should be given to any temporary or occasional additions such as stages or platforms and
adjusted accordingly. For outdoor use, or other areas with air movement/wind the directional Far Infrared
spread may reduce by 1/3 to 1/2. In these areas, we recommend mounting at the lowest recommended
height and proportionally increasing the number of heaters. Power can also be adjusted with the 2600R
model.
INSTALLATION:
Figure 3: Swivel Bracket Assembly
ENGLISH
Wall/ceiling mount swivel
brackets and accessories
are provided with the
heater which has been
specifically designed to
allow this product to be
fitted to a wall or ceiling
with adequate clearances
(140mm or 5.5") at the
back of the unit. The sides
and ends of the heater
must be positioned at
least 300mm / 12" away
from the nearest wall or
other surface.
For longer distances from
the ceiling, an optional
wire suspension kit can
be purchased from a
recommended supplier.
Please contact Herschel
for further information.