Publicidad
Idiomas disponibles
Idiomas disponibles
EN
• The configuration of the function has concluded. Press START (14)
to start defining the next phase (1.2,3...).
• REST. The machine will be stopped for the time you indicate.
• A flashing time will appear on the display. Use the UP (11) and
DOWN (12) buttons to determine the stop time and the START
button (14) to set it.
• The function is finished. Press START (14) to start defining the next
phase (1.2,3...)
• PAUSE The machine will be stopped until the user presses the
START button (14).
• The function is finished. Press START (14) to start defining the
next phase (1.2,3...).
• END Closes the program.
• To end the program:
• Configure the last phase of the program and choose the END function.
• If you want to exit the machine parameter configuration, push the
PULSE (15) twice until the SAMMIC symbol appears.
• To access the new program:
• The new program can be accessed with the (DOWN) arrows 12. It
will be configured with the chosen name (C1, C2, C3...). To run the
program, press the START button (14).
DELETE A PROGRAM (C1, C2, C3,...)
- Unplug the machine and wait 20 seconds before reconnecting.
- Plug in the machine , and within 3 seconds, press and hold the PULSE
button (15), which accesses the parameters menu.
- Use the UP keys (11) until the PROGRAMMES parameter is reached,
then press the START button (14) to access the creation or modification
of a programme.
- Use the UP (11) or DOWN (12) keys to locate the programme you want
to delete (C1, C2, C3...).
- Once the programme is located, press the START button (14).
- Once you have accessed the programme configuration:
• The screen shows us, in the upper left, the name of the program (C1,
C2, C3...) and the phase (1.2,3..) that you are configuring.
• Enter the stage 1 configuration with the START button (14).
• Find the End function using the UP (11) or DOWN (12) buttons and
press START (14). You have successfully deleted the program.
- If you want to exit the machine parameter configuration, push the PULSE
button (15) twice until the SAMMIC symbol appears.
- 20 -
Publicidad
