Jonsered CS 2245 II Manual De Instrucciones página 10

Dear customer!
Congratulations on your choice to buy a Jonsered
product!
Your purchase gives you access to professional help with
repairs and service whenever this may be necessary. If
the retailer who sells your machine is not one of our
authorized dealers, ask for the address of your nearest
servicing dealer.
It is our wish that you will be satisfied with your product
and that it will be your companion for a long time. Think of
this operator's manual as a valuable document. By
following its' content (using, service, maintenance etc) the
life span and the second-hand value of the machine can
be extended. If you ever lend or sell this machine, make
sure that the borrower or buyer gets the operator's
manual, so they will also know how to properly maintain
and use it.
Good luck on using your Jonsered machine!
Jonsered has a policy of continuous product development
and therefore reserves the right to modify the design and
appearance of products without prior notice.
10 – English
INTRODUCTION
What is what on the chain saw?
1 Cylinder cover
2 Air purge.
3 Start reminder
4 Combined start and stop switch
5 Rear handle
6 Information and warning decal
7 Fuel tank
8 Adjuster screws carburetor
9 Starter handle
10 Starter
11 Chain oil tank
12 Product and serial number plate
13 Front handle
14 Front hand guard
15 Muffler
16 Saw chain
17 Bar tip sprocket
18 Guide bar
19 Bumper spike
20 Chain catcher
21 Chain tensioning screw (CS 2245 II)
22 Clutch cover (CS 2245 II)
23 Right hand guard
24 Throttle trigger
25 Throttle lockout
26 Clutch cover (CS 2245S II, CS 2250S II)
27 Chain tensioner wheel
28 Knob
29 Guide bar cover
30 Combination spanner
31 Operator's manual
1155357-49 Rev.3 2016-12-12