Powerplay SPYDER SPY1500V Instrucciones De Montaje, Cuidado Y Uso página 5

Assembly Instructions
6
D
G
7
H
G
8
H
G
1
2
Hold back the collar at one end of the end of the hose
(G). Push firmly to connect hose fitting to the water outlet
tube on the front of the power washer unit (D). Twist the
collar clockwise to secure. Confirm hose is locked into
the water outlet by slightly pulling on the hose.
Note: DO NOT use pliers or locking pliers to tighten.
Push firmly to connect hose fitting (G) to spray gun (H).
Confirm hose is locked into spray gun by slightly pulling on
them.
To remove the hose, push the button on lower front of gun
to release the hose (G) connection from the spray gun (H).
8
Assembly Instructions
9
H
I
Unock
H
I
Lock
10
H
J
11
D
To lock the trigger of the spray gun (H), aim the gun
away from you and push the trigger button (I). After
doing so, squeeze or pull the trigger to make sure it is
locked and will not move. ALWAYS keep spray gun (H)
locked when not in use.
Insert lance (J) into spray gun (H) and turn clockwise to
tighten (DO NOT overtighten).
Note: ALWAYS engage the safety lock (I) when changing
lances ensure that they do not accidentally eject with
force during removal.
Attach a garden hose to the garden hose adapter on the
back of the power washer unit (D).
Note: Flush out garden hose before connecting to
garden hose adapter.
Assembly is now complete. Read and observe all safety
instructions before turning on the power washer.
9