Operation
Disposal
Dear Testboy customer: purchasing our product gives you the option of returning the instrument to suitable collection points for
waste electrical equipment at the end of its lifespan.
The WEEE directive regulates the return and recycling of electrical appliances. Manufacturers of electrical appliances
are obliged to take back and recycle all electrical appliances free of charge. Electrical devices may then no longer be
disposed of through conventional waste disposal channels. Electrical appliances must be recycled and disposed of
separately. All equipment subject to this directive is marked with this logo.
Disposal of used batteries
As end user, you are legally obliged (battery law) to return all used batteries;
disposal by the household waste is forbidden!
Batteries containing contaminant material are labelled with this symbol indicating that they may not be disposed of in
normal domestic waste.
The designations for the essential heavy metals are, amongst others:
Cd = Cadmium, Hg = Mercury, Pb = Lead, Mn = Manganese, Li = Lithium.
You can return your used batteries to collection points in your community or anywhere where batteries are sold free-
of-charge.
Certificate of quality
All activities and processes carried out within Testboy GmbH relating to quality are subject to ongoing monitoring within the frame-
work of a Quality Management System. Furthermore, Testboy GmbH confirms that the testing equipment and instruments used
during the calibration process are subject to an ongoing inspection process.
Declaration of conformity
The product conforms to the most recent directives. For more information, go to www.testboy.de
Operation
Thank you for choosing the Testboy
ges (1 V to 1500 V) and AC voltages (1 V to 1000 V) against earth, polarity, rotating field direction and continuity tests up to 500 k
can be performed.
The Testboy
TV 230 can also be used in harsh environments due to its high degree of protection (IP64)
®
The display of the Testboy TV 230 is intended as a guide value for two-pole voltage testing, not as a measured value.
Please use suitable measuring equipment for this purpose!
Safety instructions
You have chosen a device that offers you a high level of safety. To ensure safe and correct use, it is essential that you read these ope-
rating instructions completely before using the device for the first time.
The following safety precautions apply:
The device must be checked for function shortly before use (VDE regulation 0105, part 1). Make sure that the test line and
|
the device are in perfect condition. Check the device at a known voltage source, e.g. 230 V socket.
If the display of one or more functions fails, the device must no longer be used and must be checked by qualified personnel.
|
|
Only touch the device by the handles below the mechanical marking, avoid touching the test prods!
Only perform tests for freedom from voltage on two poles!
|
The device must not be operated in a damp environment!
|
|
Do not use with the battery compartment open! The test probes must be removed from the test circuit during a battery change.
A perfect display is ensured in the temperature range from -15 °C to +55 °C.
|
Always keep the device dry and clean. The housing may only be cleaned with a damp cloth.
|
|
The additionally indicating sound signal and vibration at voltages > 50 V AC / 120 V DC are only for warning of life-threatening volta-
ges, not for testing purposes!
|
Replace the batteries immediately if the device switches off again shortly after or as soon as it is switched on.
|
The various indicating signals of the voltage tester (including the ELV limit value) must not be used for measuring purposes.
Do not use any test leads on this unit other than the test leads supplied with the unit.
|
|
It is not allowed to use the delivered exchangeable test lead in combination with other devices which are not explained in this manual.
14
®
TV 230, a forked current clamp including a two-pole voltage tester with LCD display. DC volta-
.
®
Testboy
TV 230